UHF RFID Reader Module is usually built into other products and used. The most commonly used cases are mainly used when embedded in industrial handheld readers, RFID printers, and industrial equipment. The interface with the host mainly uses UART (3.3V TTL Level). When communicating with RS232, a separate serial driver board must be used.
860MHz to 960MHz
UART (TTL): X NUMX Kbps
8 data bits / No parity / 1 stop bits
Length: 40.5mm (1.58inches)
Width: 35.8mm (1.42inches)
Height: 7.4mm (0.3inches)
Weight: 18.0g (0.66oz)
Storage Temperature: -20 ° C to 70 ° C
Operating Temperature: -10 ° C to 50 ° C
KCC, ETSI EN 302_208 (CE), RoHS, FCC Part15
Planned *: SRRC (China), TELEC (Japan)
Air Interface Protocols
EPC C1G2 / ISO 18000-63
RF Output Power
Adjustable 5-30 dBm with 1 dB steps
Power Accuracy: ± 0.5 dBm
Power On / Off control for shut down
Average Current Consumption
Scan Mode: 1.5 A @ 30 dBm
4.0 V, (3.8V to 4.2V)
50 Ω port with CMP (Coaxial Micro Plugs) VSWR 1.5: 1 or lower for best performance
Read range up to 10 meters for a single tag.
Anti-collision performance up to 700 tags / second.