UHF RFID reader module (IDRO900ME-T)
Applications
- Factory Automation Control
- Item management
- Asset tracking
- Access control
개요
This product is a high-performance module using the latest Impinj chip. The UHF RFID Reader Module is usually used embedded in other products. The most common use case is when it is embedded in industrial handheld readers, RFID printers, and industrial equipment.
The interface with the host mainly uses UART (3.3V TTL Level). When communicating with RS232, a separate serial driver board should be used.
Specifications
Frequency
860MHz to 930MHz
Host Communication
UART (TTL): X NUMX Kbps
8 data bits / No parity / 1 stop bits
Physical Dimension
Length: 27.0mm (1.06inches)
Width: 25.0mm (0.98inches)
Height: 4.2mm (0.17inches)
Weight: 3.5g (0.12 oz)
Environment
Storage Temperature: -30 ° C to 80 ° C
Operating Temperature: -20 ° C to 60 ° C
Regulatory Support
Planned*: FCC15.247, KC (Korea), ETSI EN 302_208 (CE)
Planned *: RoHS, SRRC (China), TELEC (Japan)
Standard Protocols
EPCglobal UHF Class 1 Gen 2 / ISO 18000-63
RF Output Power
Adjustable in 5 ~ 30dBm by 1dB steps
Accuracy: ±0.5dBm
Average Current Consumption
Scan Mode: 1.5A@30dBm
Supply Voltage
4.0V
Antenna Connection
50 Ω port with CMP (Coaxial Micro Plugs) VSWR 1.5: 1 or lower for best performance
support multiport antenna
Read Performance
Read range up to 12 meters(Depends on tag) for a single tag.
Anti-collision performance up to 250 tags / second
